Samsung S5620 Flash Guide

What to do first:
1) Save everything.
2) Take out SIM card.
3) Take out Micro SD.

What you need:
1) Firmware.
2) Flash program.
3) Flash cable (Original USB cable)
4) Your phone: S5620.

Lets start.
1) Start with a hard rest for safety. (code *2767*3855#)
2) Check your firmware (Code *#1234#)
3) Check our firmware list and download a firmware you want. (We use S5620XEJD1)
4) Download the flash program. (Multiloader v5.62!) (Find this on our S5620 page)
5) Unrar the firmware.
6) Unrar the program.
7) Into the Firmware you will see three files. (Our ReadMe, CSC and CODE)
8) Open the multiloader. (Set a check by BRCM2153)
9) Set a check by Boot Change.
10) Click on Boot and go to the Boot file and click.
11) Set in multiloader a check by All Download.
12) click on Amss and go to the file.
13) Do the same by Rsrc1, Rsrc2, Factory FS, CSC, SHP SPP and PFS.
14) NOTE select by RSRC2 always the LOW version!
15) NOTE check FFS and PFS on the same region. (We use SER)

16) Take you USB cable.
17) Take your phone.
18) Put your phone in Download MODE.(Sound Key Down + Camera + Power On) (Make sure your phone is out before)
19) You will seen now: DOWNLOAD MODE or ALL DOWNLOAD or BOOT change.

No comments:

Post a Comment